Trouble Reset Procedure On Olivetti MF552 etc.

From time to time you may need to reset an error code or if a tray shuts down (goes missing from the screen) or if generally the MFD is being a bit buggy.

The steps to do a Trouble Reset are very straight forward and are the same for most of the Olivetti Colour MFDs (Konica Minolta based machines).

Step One. Locate the main switch, this will be behind the front door near the waste toner. Then turn the machine off!

MF454 Power Switch

Step Two. Whilst holding down the yellow reset button on the machines control panel turn the power back. Keep the reset key held down!

Olivetti MF452 Reset Key



Step Three. Wait for the machine to boot up and the screen goes white and says Trouble Reset in the center of the screen.

Trouble Reset

Step Four. Press the screen where it says Trouble Reset, it should now say OK

Trouble Reset OK

Step Five. Turn power off at main switch again and wait for 5-6 seconds or until all the lights have gone out on the machine. Now turn the machine back on.

Your machine should now be reset and in most cases now be working again. Should the problem persist then call for an engineer to sort out whatever issue you may be getting.

Elmdale Maintenance – 01189821444

One thought on “Trouble Reset Procedure On Olivetti MF552 etc.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.