Olivetti Colour Print Driver Settings

image_pdfimage_print

These are our Standard Print Driver Settings for the Olivetti range when we install a machine at a client. They cover most of the current range and each driver has many of the same features and the settings are in the same place but may just be labelled differently. If you get stuck the contact us and we will try to fill in the gaps.

1. Turn off Auto in “Obtain Settings” this is under the Configuration tab in the printer properties. This is important to do as the driver will constantly query the printer if it isn’t turned off and will cause a delay when the user wants to make any changes to print settings.

Obtain Settings

2. Next we turn off “My Tab” this is under the settings tab, click the box that says “My Tab Settings” then un check the radio button that says “Display My Tab”

My Tab Settings

3. Next go to “Advanced” then “Printing Defaults” change the quality from Auto Colour to Grayscale, unless you want everything to print as colour then leave this setting alone. If this is a driver that is held on a server and shared out to clients you will have to repeat this setting under the “General” tab in “Printing Preferences” otherwise when the driver is loaded on the client computer the setting will not be transferred across correctly.

Quality Settings

4. Under the same 2 tabs in the properties of the driver you will need to alter the duplex setting if you do not want all your prints to come out 2 sided. If you do want everything 2 sided then again you can leave this setting.

Duplex Settings

If you need any more information then please contact Elmdale Maintenance on 01189821444

 

2 thoughts on “Olivetti Colour Print Driver Settings

  1. John

    Hi any idea how you set up the email address in order to be able to email scans on an Olivetti MF280 not able to find it in the user guide.

    Thanks John

    Reply
    1. Andy Norman Post author

      Hi John, if you log in to the administrator section, password is 12345678. You can access it by pressing utility/counter on the control panel. Then press administrator/machine settings, then administrator registration then enter the email address where indicated, next go back one screen and press input machine address, then enter the email address again. Hope that makes sense.

      Andy

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.