How To Replace Staples in an FS-526 Finisher
How to replace the staples for the 100 sheet stapler on the FS-526 multi-position finisher
Remove the staple unit from the finisher by lifting the blue handle and pulling towards you.
Next squeeze the tabs marked push.
The top will then pivot up and you can remove the white inner cartridge.
Next insert the new cartridge with the arrows facing down and with the tape still around the staples.
Next pull out the tape and close the lid.
Then re-fit the staple unit to the finisher.
Should you require assistance or need to re-order staples please contact Elmdale Maintenance on 01189821444