How To Replace Staples in an FS-526 Finisher

How to replace the staples for the 100 sheet stapler on the FS-526 multi-position finisher

Remove the staple unit from the finisher by lifting the blue handle and pulling towards you.

Next squeeze the tabs marked push.

fs-526 push tabs

The top will then pivot up and you can remove the white inner cartridge.

pull out old cartridge

Next insert the new cartridge with the arrows facing down and with the tape still around the staples.

replace cartridge

Next pull out the tape and close the lid.

pull out tape

Then re-fit the staple unit to the finisher.

Should you require assistance or need to re-order staples please contact Elmdale Maintenance on 01189821444

 

2 thoughts on “How To Replace Staples in an FS-526 Finisher

    1. elmdale

      Yes we do sell these staples, if you would like to contact our office we can arrange to get some sent out to you: 0118 982 1444

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.